Building the prototype and coding additional pieces

Here we get a look inside the 
prototype,which we are using for testing before we create the real robot out of acrylic. We are using Raspberry Pi components such as a Raspberry Pi circuit board.

Recently we've been coding our  additional parts such as a claw for the Eco-disaster challenge which we can dismount or mount depending on  which challenge we'll do first. Here is some footage of our claw opening and closing and going up and down.



After that, we began testing and practising for the challenge Eco-Disaster. We created some barrels ( using a 3D printer ), both red and green. Using these, we tested our skills with it with the claw shown in the video.